Soft robots and biomedical implants that reconfigure themselves upon demand are closer to reality thanks to a novel way for printing shapeshifting materials.
Rafael Verduzco and graduate student Morgan Barnes of Rice University's Brown School of Engineering have developed a method for printing objects that can be manipulated to take on alternate forms when exposed to changes in temperature, electric current or stress. The researchers think of this as reactive 4D printing, which they describe in a paper in ACS Applied Materials and Interfaces.
They first reported their ability to make morphing structures in a mold in 2018. But using the same chemistry for 3D printing limited these structures to shapes that sat in the same plane. That meant no bumps or other complex curvatures could be programmed as the alternate shape.
According to Verduzco, overcoming that limitation by decoupling the printing process from shaping represents a significant step toward more useful materials.
"These materials, once fabricated, will change shape autonomously," he said. "We needed a method to control and define this shape change. Our simple idea was to use multiple reactions in sequence to print the material and then dictate how it would change shape. Rather than trying to do this all in one step, our approach gives more flexibility in controlling the initial and final shapes and also allows us to print complex structures."
The lab's challenge was to create a liquid crystal polymer ‘ink’ that incorporates mutually exclusive sets of chemical links between molecules. One set establishes the original printed shape while the other set is induced by physically manipulating the printed-and-dried material. Curing the alternate form under ultraviolet light locks in those links.
Once the two programmed forms are set, the material can then morph back and forth between them when, for instance, it's heated or cooled.
The researchers had to find a polymer mix that could be printed in a catalyst bath and still hold its original programmed shape. "There were a lot of parameters we had to optimize – from the solvents and catalyst used, to degree of swelling, and ink formula – to allow the ink to solidify rapidly enough to print while not inhibiting the desired final shape actuation," Barnes explained.
One remaining limitation of the process is the ability to print unsupported structures, like columns. To do so would require a solution that gels just enough to support itself during printing, Barnes said. Gaining that ability will allow researchers to print far more complex combinations of shapes.
"Future work will further optimize the printing formula and use scaffold-assisted printing techniques to create actuators that transition between two different complex shapes," she said. "This opens the door to printing soft robotics that could swim like a jellyfish, jump like a cricket or transport liquids like the heart."
This story is adapted from material from Rice University, with editorial changes made by Materials Today. The views expressed in this article do not necessarily represent those of Elsevier. Link to original source.
