The 18th Plansee Seminar is an international conference which presents new insights in the field of refractory metals and hardmaterials. It will take place at the headquarters of the Plansee Group in Reutte, Austria from 3–7 June, 2013.
The programme will run as follows.
Sunday, 2 June, 2013
14:00 - 22:00 Registration Desk Open
Monday, 3 June, 2013
09:00 - 09:45 Opening Ceremony
09:45 - 12:00 Opening Session
09:45 Leadership, Innovation, Globalization: Challenges and Opportunities in a Globalized World
Simon H., Simon-Kucher & Partners, Germany
10:30 Global Trends in the PM Refractory Metals Industry, Shashkov D., H.C. Starck Inc., USA
11:00 Global R&D Trends in the P/M Hard Metals Industry, Norgren S, García J, Blomqvist A, Yin L
Sandvik Mining R&D Rock Tools, Sweden, Sandvik Coromant R&D, Sweden, Sandvik Hard Materials R&D, China
11:30 A Sustainable Pathway for the Recovery and Recycling of Refractory Metals: A Strategy for the Management of Critical Materials, Apelian D., Worcester Polytechnic Institute, USA
13:30 - 15:40 Hard Materials - Materials 1
13:30 Processing and Properties of Functionally Graded Hardmetals, Fang Z.Z., Fan P., Xu W, Kyusup H, Haitao W, Jun G, University of Utah, USA, Heavystone Lab LLC, USA
14:00 Design of Graded Cemented Carbides with Fe-Ni-Co Binders Assisted by Thermodynamic and Kinetic Modeling, García J, Sandvik Coromant R&D, Sweden
14:20 Cobalt Layer Formation: New Insights and In Situ Observations, Sachet E, Mühlbauer G, Schubert W.-D, Kubo Y, North Carolina State University, USA, Vienna University of Technology, Austria, Hitachi Tool Engineering, Ltd., Japan
14:40 Cobalt Capping: A Technique for Improving the Transverse Rupture Strength, Fracture Toughness and Wettability by Braze Alloys of WC-Co Hardmetals, Konyashin I, Hlawatschek S, Ries B, Lachmann F, Vukovic M, Element Six GmbH, Germany
15:00 Miraculous Massive Migration Behavior of Rare Earth Additives in WC–Co Cemented Carbides, Zhang L, Chen S, Wang Z, Feng Y.-p, Wan Q, Ke R, State Key Laboratory of Powder Metallurgy, Central South University, China, Changsha Mining and Metallurgy Research Institute Co., Ltd., China
15:20 Effect of Carbon Activity on the Shape and Size Distribution of WC, Borgh I, Hedström P, Persson T, Norgren S, Borgenstam A, Ågren J, Odqvist J, KTH Royal Institute of Technology, Sweden, Seco Tools AB, Sweden, Sandvik Mining R&D Rock Tools, Sweden
16:00 - 17:50 Refractory Metals - Materials 1
16:00 Recovery and Recrystallization Behavior of Technically Pure Molybdenum, Primig S, Leitner H, Knabl W, Lorich A, Stickler R, Montanuniversität Leoben, Austria, PLANSEE SE, Austria, University of Vienna, Austria
16:30 Strengthening Mechanisms of the Molybdenum Based Alloy MHC, Pöhl C, Schatte J, Leitner H, Montanuniversität Leoben, Austria, PLANSEE SE, Austria
16:50 The Study on High Temperature Stability of Carbon in Carbon-Added Molybdenum and TZM Alloy, Kadokura T, Hiraoka Y, Itohara T, Ikegaya A, A.L.M.T. Corp., Japan, Okayama University of Science, Japan
17:10 Structural Mo-Ti-Zr-C Alloys: Room for Improvement?, Lipkin D, Dheeradhada V, Rogers K, Tiearney T, Kar S, GE Global Research, USA, GE Healthcare, USA, IIT-Kharagpur, India
17:30 Thermal Analysis, Transformations and Properties of Pt- and Pd-Alloyed Zr-Nb Alloys, Gasik M, Nomura N, Kondo R, Hanawa T, Aalto University School of Chemical Technology, Finland, Tokyo Medical and Dental University, Japan
16:00 - 17:50 Poster Session Hard Materials - Materials
Effect of NiAl on the WC Morphology in WC-Co-NiAl Composites, Long J, Zhang Z, Xu T, Wei X, Lu B, State Key Laboratory of Cemented Carbide, China
Controlling Cobalt Capping in Sintering Process for Cermets, Englund S, Haglöf F, García J, Sandvik Coromant R&D, Sweden
Influence of Co Content on the Structure and Mechanical Properties of Ultrafine WC-Co-VC Hard Alloy, Shi K, Dong K, Jiang Q, Zhou K, Central South University, China Zigong Cemented Carbide Co., Ltd., China
Nickel-Based Binding Phase Effect Upon Selected Properties of Supercoarse Sintered Carbides, Richter J, Krajzel J, Silesian University of Technology, Poland, Wegliki Spiekane BAILDONIT, Poland
Effects of a TiC Coating on Diamonds: Structure, Microstructure and Mechanical Properties, Oliveira L, Cabral S, Filgueira M, State University of North Fluminense, Brazil
Grain Growth During Sintering of Tungsten Carbide Ceramics, Poetschke J, Richter V, Gestrich T, Michaelis A, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Germany
Sintering Features and Mechanical Properties of WC-316L Composite, Santos A, Gomes U.U, Furukava M, Franciné C, Pereira C, Filgueira M, UFRN, Brazil, UENF, Brazil
Structural Ceramics in Functionally Gradient, Bertolete M.C, Machado I.F, Fredericci C, University of São Paulo, Brazil, Center for Processes and Products Technology (CTPP), São Paulo, Brazil
Reactive Sintering of WC-Cr-Co Hardmetals, Juhani K, Pirso J, Tarraste M, Viljus M, Letunovitš S, Tallinn University of Technology, Estonia
Interdependencies of Grain-Growth Inhibitor Diffusion in WC-Co Hardmetals, Buchegger C, Langlade J, Lengauer W, Vienna University of Technology, Austria, CNRS, France
Surface- and Interface-Zone Evolution of Cermets and Cermet/Hardmetal Laminates, Wawrzik S, De Barros T, Lengauer W, Vienna University of Technology, Austria, Polytech Clermont-Ferrand, France
The Influence of TiC Powder to Reactive Sintered TiC-NiMo Cermets Microstructure and Mechanical Properties, Jõeleht M, Pirso J, Juhani K, Viljus M, Tallinn University of Technology, Estonia
Microstructure Evolution of WC-TiC-Co Cemented Carbides During Reactive Sintering, Tarraste M, Juhani K, Pirso J, Viljus M, Letunovitš S, Tallinn University of Technology, Estonia
PM Processing and Characterization of Fe-Cu-Co-Diamond Composites, Filgueira M, Oliveira L, Gomes U.U, State University of North Fluminense, Brazil, Federal University of Rio Grande do Norte, Brazil
A Thermodynamic Description of the Al-C-Ni-W Quaternary Cemented Carbide System, Wang Y, Chen C, Zhang Z, Long J, Xu T, Du Y, Central South University, China, State Key Laboratory of Cemented Carbide, China
Microstructure and Properties of Cemented Carbides Prepared by In-situ Synthesized Composite Powder, Wei C, Song X, Fu J, Liu X, Wang H, Gao Y, Wang Y, Beijing University of Technology, China
On the Formation of Precipitations in Highly (Cr,V)-Doped Cemented Carbides, Toufar C, Schubert W.-D, Hashiya M, Kubo Y, Vienna University of Technology, Austria, Hitachi Tool Engineering, Japan
Design, processing and mechanical behaviour of Cermet/WC-Co laminates, Gotor F.J, Córdoba J.M, Torres Y, Instituto de Ciencia de Materiales de Sevilla, Spain, Departamento de Ingeniería Mecánica y de los Materiales-Universidad de Sevilla, Spain
The International Journal of Refractory Metals and Hard Materials – an Update, Ortner H.M, Darmstadt University of Technology, Austria
16:00 - 17:50 Poster Session Hard Materials - Applications
Tribological behavior of hardfacing materials in PWR environment, Chitty W.-J, Cedat D, AREVA, France
Applications of PM Hard Materials to Scrapers of Railway Machines, Besleaga C, Negriu R.M, Popescu I, Badea S.G, Econet Prod Bucharest, Romania
Design Optimization of Complex Shaped Cutting Tool Systems on the Examples of a Lightweight Crankshaft Milling Cutter and a Lightweight Chasing Wheel System, Hosp A, Valentini B, Gerzoskovitz S, Brandhofer H, Schleinkofer U, Plankensteiner A, CERATIZIT Austria GmbH, Austria, PLANSEE SE, Austria
High Performance Ultrafine Cemented Carbides and Its Application, Wei C, Song X, Fu J, Liu X, Nie Z, Guo G, Beijing University of Technology, China
Tuesday, 4 June, 2013
08:00 - 10:00 Refractory Metals - Applications
08:00 Substitution of Thoria Additions by Lanthanum-Oxide Doping in Electrodes for Atmospheric Plasma Spraying, Heißl M, Mitterer C, Granzer T, Schröder J, Kathrein M, Montanuniversität Leoben, Austria, PLANSEE Composite Materials GmbH, Germany, PLANSEE SE, Austria
08:20 Tungsten Heavy Alloys for Collimators and Shieldings in the X-ray Diagnostics, Handtrack D, Tabernig B, Kestler H, Pohl P, Glatz W, PLANSEE SE, Austria
08:40 Development of Tungsten-Based Materials for Fusion Engineering Applications, Smith G, Armstrong D, Beck C, Edmondson P, Gibson J, Hanna L, Xu A, Yi X, Grant P.S, Marrow J, Moody M, Roberts S.G, Oxford University, United Kingdom
09:00 Recent Advances in Ta Thin Film Applications, Abouaf M, Kumar P, H.C. Starck Inc., USA
09:20 Co-sputtered Mo-W and Mo-Nb Thin Films, Sun S, Rozak G, Zhang Q, H.C. Starck, USA
09:40 Molybdenum and Tungsten Trioxides and Their Solid Solution for Germ-Free Surfaces, Guggenbichler J.P, Lackner M, AMiSTec GmbH & Co. KG, Austria
10:20 - 12:20 Hard Materials - Applications
10:20 Precipitation of M7C3 Carbides During Sintering of TiCN-WC-Ni-Co-Cr Alloys Used in Hot Rolling Applications, Sánchez-Moreno J.M, Iparraguirre I, Rodriguez N, Ibarreta F, Martinez R, CEIT-Centro de Estudios e Investigaciones, Spain, FMD-CARBIDE, Spain
10:40 New Applications for Polymer Matrix Materials Based on Hard Material Fillers, Kayser A, ESK Ceramics GmbH & Co.KG, Germany
11:00 Investigations on Adhesive Wear Mechanism in Turning of Stainless Steels, Collin M, Sandvik Coromant, Sweden
11:20 Effect of Gradation by Reactive Imbibition on Commercial WC-Co Drilling Tools Used in Oil and Gas Industries, Ther O, Colin C, Gerbaud L, Dourfaye A, Mines Paristech, France, Varel Europe, France
11:40 Chromium Containing TiAlN Coatings for Metal Cutting, Kohlscheen J, van den Berg H, Kennametal Shared Services GmbH, Germany
12:00 A Tribological Approach Towards Engineering the Wear Behavior of PVD Coatings, Morstein M, Dessarzin P, Karvankova P, PLATIT AG, Switzerland
10:20 - 12:20 Poster Session
Refractory Metals - Materials, Dynamic Behavior and Failure Characteristics of an Extruded Tungsten Heavy Alloy at Elevated Temperatures, Fan J.L, State Key Laboratory for Powder Metallurgy of Central South University, China
The Effect of Molybdenum Powder Micro-Morphology on Properties of Molybdenum Products, An G, Liu R.Z, Li J, Sun Y.J, Sun J, Jinduicheng Molybdenum Group Co., Ltd., China, Xi'an Jiaotong University, China
(Mo,W)5Si3 and (Mo, W)Si2 Silicides Interaction with Carbon, Gnesin B, Gnesin I, Nekrasov A, ISSP, Russia, IEM, Russia
Characteristics of a Multicomponent and Low-Density Nb-Ti-Al Alloy, Feng W, Xin Z, Run B, Xiaomei C, Xiaoming Z, Zhongkui L., Northwest Institute for Non-ferrous Metal Research, China
The Reaction Behavior of Carbon in TZM Alloy, Lai Ping L, Jing L, Xiao Hui L, Guodong W, Xin Z, Northwest Institute for Non-ferrous Metal Research, China
Microstructure and Mechanical Properties of Mo-05Y-05Ce Alloy Wire Strengthened by Nanometer Particles, Liu R, Feng P, Yang Q, Zhao H, Fu J, JDC Moly Corporation, China
Controllable Synthesis of One Dimensional W/WO2.72 Heterostructure Via Chemical Vapor Deposition, Liu X, He Y, Lin N, Central South University, China
Microstructure and Mechanical Properties of Mo-LaO3-ZrB2 Alloys, Zhang G, Zhang H, Sun Y, Liu G, Liu D, Xi'an University of Technology, China, Jinduicheng Molybdenum Co. Ltd. of China, China, Xi’an Jiaotong University, China
Evolution of Microstructure and Strength in Doped Tungsten Wire, Schade P, HTM Consulting, Germany
Preparation of Tungsten and Molybdenum Plates with Uniform Grain Structure, Wei X, Xu T, Zhang Z, Fu C, Long J, State Key Laboratory of Cemented Carbide, China, Zhuzhou Cemented Carbide Group Corp.Ltd., China
Pyrovacuum Refining of V-Cr-Ti Alloys Produced by Aluminothermic Reduction, Kumar S, Mukherjee A, Krishnamurthy N, Bhabha Atomic Research Centre, India
Bulk Rhenium Production Based on Plasma Reduction of Ammonium Perrhenate, Samokhin A, Alexeev N, Don G, Novikov A, Fadeev A, Blagoveschensky Y, Institute of Metallurgy and Materials Science, Russia, DRAGTSVETMET, Russia
Characterization of the Precipitation Mechanism in the Molybdenum Based Alloy MHC, Lang D, Pöhl C, Schatte J, Leitner H, Montanuniversität Leoben, Austria, PLANSEE SE, Austria
The Influence of a Mo5SiB2 Interlayer on the Oxidation and Diffusion Behavior of Boron Containing MoSi2 and Mo5Si3 Coatings on Mo-9Si-8B Alloys, Lange A, Braun R, Kestler H, Heilmaier M, German Aerospace Center, Germany, PLANSEE SE, Austria, Karlsruhe Institute of Technology, Germany
Method of Manufacturing of Composite Based on Powder Chromium, Slys I, Brodnikovskyi M, Brodnikovskyi I, Frantcevych institute for problems of materials science, Ukraine
New High-Temperature Protective Coatings for Carbon-Based Composite Materials, Terentieva V, Astapov A, Moscow Aviation Institute (State University of Aerospace Technologies), Russia
The Effect of Melt Cooling Rate on the Structure and High Temperature Mechanical Properties of Nb-18.7 at.% Si Alloy, Karpov M, Vnukov V, Korzhov V, Stroganova T, Zheltyakva I, Prokhorov D, Gnesin I, Kiyko V, Kolobov Y, Golosov E, Institute of Solid State Physics RAS, Russia, Belgorod State University, Russia
Structure and Mechanical Properties of Nb-Al System Alloys with Intermetallide Hardening, Karpov M, Vnukov V, Korzhov V, Zheltyakva I, Prokhorov D, Gnesin I, Kiyko V, Kolobov Y, Golosov E, Nekrasov A., Institute of Solid State Physics RAS, Russia, Belgorod State University, Russia, Institute of Experimental Mineralogy RAS, Russia
Study on New TIG-Electrodes Containing a Mix of Metal Oxides, Gobran H, Zimmermann M, Goryeva T, Bayerische Metallwerk GmbH, Germany, Gesellschaft für Wolfram Industrie GmbH, Germany
The Thermal Properties and Microstructures of Tungsten Thick Coatings for Plasma Facing Components by Chemical Vapor Deposition, Song J, Yu Y, Peng F, Zhuang Z, Lian Y, Liu X, Xiamen Honglu Tungsten & Molybdenum Industry Co. Ltd, China, China National R&D Center for Tungsten Technology, Xiamen Tungsten Co. Ltd, China, Fusion Reactor Design & Material Division, Southwestern Institute of Physics, China
Mechanical Properties of Molybdenum Alloys Subjected to Dilute Carbon Monoxide Gas Heating, Nagae M, Ise N, Kadokura T, Takida T, Ikegaya A, Takada J, Hiraoka Y, Research Institute for Applied Science (RIAS), Japan, A.L.M.T. TECH Inc., Japan, Okayama University, Japan, 4Okayama University of Science, Japan
Manufacturing of Mo Preforms with Defined Porosity for Subsequent Reactive Infiltration, Dadal E, Gierl C, Danninger H, Sencekova L, Izdinsky K, Simancik F, TU Wien, Austria, UMMS-SAV, Slovakia
Alloying Cr-CrSi with Germanium: A Modification Towards an Alloy for Ultra High Temperature Applications, Soleimani-Dorcheh A, Schütze M, Galetz M, DECHEMA Forschungsinstitut, Germany
Preparation for Mo/Cu FGM With Continuous Gradient, Wu Z, Li X.-w, Bu C.-y, JDC Molybdenum Co., LTD, China
High Thermal Conductivity Diamond-Metal Composite Prepared by High-Pressure-High-Temperature Technique for Heat Sinks, Chen H, Li S, Jia C, ShenZhen HAIMINGRUN Industrial CO.LTD, China, Department of Advanced Materials & Technology, University of Science Technology Beijing, China
10:20 - 12:20 Poster Session Refractory Metals - Applications
Chemical Vapor Deposition of Tungsten Coatings on X-ray Rotating Light Anodes Made of Carbon-Based Materials, Huot G, Fellmann V, Poirel H, ACERDE SAS, France
Sputtering of Rotary and Planar Mo Targets, Sun S, Zhang Q, Zeman G H.C. Starck, USA
Possible Applications of Tungsten Materials in Power Production and Future Large-Scale Projects Rieth M, Reiser J, Hoffmann A, Knabl W, Schulmeyer W, Commin L, Antusch S KIT, Germany PLANSEE SE, Austria
Thermal Shock Response of Tungsten Grades at High Base Temperatures Wirtz M, Linke J, Pintsuk G, Uytdenhouwen I Forschungszentrum Jülich, Germany SCK CEN Mol, Belgium
High Temperature Corrosion Resistant Thermal Spray Coated and HIPed FeNiCrAl for Oxycombustion Application Oksa M, Tuurna S, Lagerbom J, Mäkipää M, Suhonen T, Virta J VTT Technical Research Centre of Finland, Finland
New Design Solutions for Thermal Insulation Systems for High-Temperature Furnaces Valentini B, Plankensteiner A, Grohs C PLANSEE SE, Austria
Up-scaling of Vertical Target Plasma Facing Units for the ITER Divertor Huber T, Zabernig A, Wagner J, Löffler C, Trost C, Schulmeyer W, Sigl L.S PLANSEE SE, Austria
Lokale Gefügeverbesserung im Druckguss Tucan K.-P 1Österreichisches Gießerei-Institut, Austria
Optimization of the Surface Structure of Heating Filaments with Regard to their Apparent Thermal Emissivity Valentini B, Plankensteiner A PLANSEE SE, Austria
The Effect of the Grain Structure on Forging Deformation of the Tubular Sputtering Target Li J, Wang J, An G, Zhang C, Liu R.Z Jinduicheng Molybdenum Group Co., Ltd., China
Anti-Microbial Surfaces for Health Care Applications Using Molybdenum Oxide Lackner M, Lunk H.-J, Guggenbichler J.P AMiSTec GmbH & Co. KG, Austria Global Tungsten & Powders Corp., USA
Long Term Behavior and New Applications of SIBOR - an Oxidation Protection System for Mo and its Alloys Januschewsky J, Sulik M, Dreiling I, Kathrein M, Kestler H, Sigl L.S PLANSEE SE, Austria
13:30 - 15:40Refractory Metals - Modeling & Simulation
13:30Optimization of Erosion of Molybdenum Targets in Sputtering Magnetrons Using Plasma-Physical Simulations Feist C, Plankensteiner A, Linke C, Kuniya T, Winkler J CENUMERICS, Austria PLANSEE SE, Austria PLANSEE Japan Ltd., Japan
14:00Towards a Multiphysics Finite Element Model for Arc Erosion Simulation Röthlisberger A, Vüllers F.T.N, Kowanda C, Müller F.E.H, Diener M, Spolenak R Laboratory for Nanometallurgy, ETH Zurich, Switzerland PLANSEE Powertech AG, Switzerland
14:20Atomistic Modelling of Refractory Metals with Analytic Bond-Order Potentials: Application to Interface Energies Between bcc-W and A15-W Hammerschmidt T, Cak M, Drautz R Ruhr-University Bochum, Germany 14:40Phase Equilibria on the Nb-Cr-B System Coelho G.C, Rego C.E, Gigolotti J.C.J, Silva A.A.A.P, Nunes C.A, David N, Fiorani J.M, Vilasi M Universidade de Sao Paulo (USP) and Centro Universitario de Volta Redonda (UniFOA), Brazil Centro Universitario de Volta Redonda (UniFOA), Brazil Universidade de Sao Paulo (USP) and Universite de Lorraine, Insitut Jean Lamour, Brazil Universidade de Sao Paulo (USP), Brazil Universite de Lorraine, Insitut Jean Lamour, France
15:00Numerical Simulation of Refractory Metals and Cemented Carbides in the Regime of Powder Filling and Powder Transfer Grohs C, Plankensteiner A PLANSEE SE, Austria
15:20Fracture Toughness and Useful Life Modeling of Mo Rotary Targets Bhattacharyya A, Gaydos M, Abouaf M H.C. Starck Inc., USA
13:30 - 15:40Special Interest Session: Hard Materials - Powder Production and Recycling
13:30Review of the Hardmetal Recycling Market and the Role of the Zinc Process as a Recycling Option Karhumaa T, Kurkela M Tikomet Oy, Finland
14:00Numerical Simulation of Organic Binder Decomposition During Thermal Debinding Kraft T, Schmidt I, Riedel H Fraunhofer Institute for Mechanics of Materials IWM, Germany
14:20Effect of WC Material Properties and Milling Parameters on the Grain Size and Sintering Behaviour of Coarse WC Powder Johansson A, Persson T, Laarz E Seco Tools AB, Sweden
14:40Property Changes Induced in Sub-Micron WC Through Various Final Milling Techniques Cook R Global Tungsten & Powders Corp., USA
15:00Rim-Nitrided WC Powder: Preparation, Properties and Use for Hardmetals Wetzel M, Lengauer W, Wawrzik S, Buchegger C TU Bergakademie Freiberg, Germany Vienna University of Technology, Austria
15:20Analysis of WC with Increased Ta Doping Weidow J, Schubert W.-D Chalmers University of Technology, Sweden Vienna University of Technology, Austria 16:00 - 17:40Hard Materials - Modeling & Simulation
16:00Strength of WC/WC Grain Boundaries in WC-Co from Atomistic Calculations Petisme M, Johansson S, Wahnström G Chalmers University of Technology, Sweden Sandvik, Sweden
16:20Numerical Simulation of Microcrack Initiation and Propagation in WC/Co-Hardmetal Under Fatigue Loading Using a Hybrid FEM-XFEM Damage Model Özden U.A, Bezold A, Broeckmann C IWM RWTH Aachen University, Germany
16:40Prediction of Coated Tools Performance in Milling Based on the Film Fatigue at Different Strain Rates (withdrawn) Bouzakis K.-D, Makrimallakis S, Skordaris G, Bouzakis E, Maliaris G Aristoteles University of Thessaloniki, Greece Fraunhofer Project Center Coatings in Manufacturing (PCCM), Greece
17:00Nanometer-Thick Equilibrium Films in Doped Cemented Carbides Johansson S, Wahnström G Sandvik Coromant R&D, Sweden Chalmers University of Technology, Sweden
17:20Applying Computational Thermodynamic and Kinetics to Analyse the Effect of N in Hardmetals Frisk K, Borgh I, Markström A, Lindwall G, Norgren S Swerea KIMAB, Sweden KTH Royal Institute of Technology, Sweden Thermo-Calc Software AB, Sweden Sandvik Mining R&D Rock Tools, Sweden
Wednesday, 5 June, 2013 08:00 - 10:00
Hard Materials - Materials 2
08:00A Study of the Decomposition of the Mixed (Ti,Zr)C Phase Borgh I, Hedström P, Blomqvist A, Århammar C, Ågren J, Odqvist J KTH Royal Institute of Technology, Sweden Sandvik Machining Solutions, Sweden
08:20Using interfacial phase diagrams to fine tune Ti and V additions to WC-Co (withdrawn) Johansson S, Norgren S Sandvik Coromant R&D, Sweden Sandvik Mining R&D Rock Tools, Sweden
08:40Optimization of WC Particle Size, Ni Binder Content and MoC Addition for Improved SPS WC-TiC-Ni Cemented Carbides Genga R, Cornish L, Akdogan G University of the Witwatersrand, South Africa University of Stellenbosch, South Africa
09:00Hot Press Sintering of Hard Material Master Alloys Synthesized in Situ by Mechanically Induced Self-Sustaining Reaction Córdoba J.M, Chicardi E, Lences Z, Gotor F Materials Science Institute of Seville, Spain Slovak Academy of Science, Slovakia
09:20Microstructure Evolution of Nanocrystalline WC-10Co Hardmetals During Sintering Lin C, Cao R, Lin Z, Li Y General Research Institute for Non-ferrous Metals, China
09:40Nanoscaled Hardmetals - Fiction or Reality? Richter V, Pötschke J, Holke R, Michaelis A Fraunhofer IKTS, Germany
10:20 - 12:30Refractory Metals - Materials 2
10:20Microalloying of Mo-Si Alloys as a Key for the Development of Ultrahigh Temperature Mo-Borosilicide Alloys Heilmaier M, Schliephake D Karlsruhe Institute of Technology, Germany
10:50Bibliographical Survey on the Development of Tungsten Heavy Alloys Cury R PLANSEE Tungsten Alloys, France
11:10Development of Tungsten-Copper Functionally Graded Materials Via Ultrafine Composite Powder for Fusion Applications Yu Y, Song J, Peng F, Zhuang Z, Lian Y, Liu X 1Xiamen Honglu Tungsten & Molybdenum Industry Co. Ltd, China China National R&D Center for Tungsten Technology, Xiamen Tungsten Co. Ltd, China Fusion Reactor Design & Material Division, Southwestern Institute of Physics, China
11:30Ductilisation of W: Syntheses, Analyses and Characterization of W-Laminates Made of W-Foils Reiser J, Rieth M, Dafferner B, Hoffmann A Karlsruhe Institute of Technology, Germany PLANSEE SE, Austria
11:50The Ultrafine Rhenium Powder for Advanced Applications Bryskin B, Kostylev A, Lumpov A, Troshkina I Bryskin Metallurgical Consulting, USA FSUE Khlopin Radium Institute RPA, Russia Mendeleyev University of Chemical Technology, Russia
12:10Integrally Directionally Solidified Microstructure and Mechanical Properties of Nb-Ti-Si Based Ultrahigh Temperature Alloys Guo H, Guo X Western Metal Materials Co., Ltd, China Northwestern Polytechnical University, China
10:30 - 12:30Special Interest Session: Hard Materials - Trends in Processing
10:30Thermal Spraying – a Technology for Hardmetal Coating Solutions Berger L.-M Fraunhofer Institut IWS, Germany
10:50Development of a HVOF WC Based Thick Coating He J Global Tungsten & Powders Corp., USA
11:10Rapid Synthesis of Ultrafine WC-Co Cemented Carbides Song X, Liu X, Wei C, Wang H, Gao Y Beijing University of Technology, China 11:30Characterisation of Gas Reactions During Ceramic and Hardmetal Production Gestrich T, Jaenicke-Roessler K, Herrmann M, Neher R Fraunhofer Institute IKTS Dresden, Germany
11:50On the Interaction of Alumina During Sintering of Cemented Carbides Bicherl A, Dalbauer V, Sachet E, Schubert W.D Wolfram Bergbau und Hütten AG, Austria Vienna University of Technology, Austria North Carolina State University, USA
12:10Selective Laser Sintering of Tungsten Carbide Inlays for Local Wear Protection of Injection Molding Tools Koehler H, Seefeld T, Vollertsen F BIAS - Bremer Institut für angewandte Strahltechnik, Germany
13:40 - 15:50Refractory Metals - Corrosion
13:40Mo-Si-B Alloys for Ultra-High Temperature Applications Perepezko J.H Department of Materials Science and Engineering, University of Wisconsin-Madison, USA
14:10Corrosion of Molybdenum in Cooling Water Holzer C, Vichytil C, Mori G, Linke C Montanuniversität Leoben, Austria PLANSEE SE, Austria
14:30Corrosion of Molybdenum and Platinum Electrodes in Silicate Melts Glatzel U, Bölitz M.-C, Völkl R, Eckardt T, Koch M, Hoffmann A, Holzknecht R, Traxler H University Bayreuth, Germany Heraeus, Germany PLANSEE SE, Austria
14:50The Effect of Chromium and Palladium on Oxidation Resistance of Tungsten Makonovitsky A, Shneck R, Hessel S Metal-Tech Ltd. / Department of Materials Engineering, Ben Gurion University of the Negev, Israel Department of Materials Engineering, Ben Gurion University of the Negev, Israel Metal-Tech Ltd., Israel
15:10On the Oxidation Behavior and Protection of Niobium Silicide in Situ Composites Portebois L, Knittel S, Drawin S, Vilasi M, Mathieu S Universite de Lorraine, France SNECMA, France ONERA, France
15:30Freeze-Dried Molybdenum Solid Standards: Preparation and Characterization Dang T, Lunk H.-J, Otis J, Bard T Global Tungsten & Powders Corp., USA
13:40 - 15:50Poster Session Hard Materials - Modeling, Characterization &Testing
Plastic Yield Behaviors of Extra Coarse-Grained WC-Co Hardmetals Wu C, Nie H, Zeng Q, Feng Y China National R&D Center for Tungsten Technology, China
An Innovative Nondestructive Method for the Inspection of Brazed Cutting Tools Tillmann W, Sievers N, Zielke R Technical University Dortmund, Germany
Tribological Profile of Binderless Niobium Carbide Mathias W, Marcos S, Hardy M BAM Fed´l Inst. f. Mat´ls Res. and Testing, Germany CBMM Companhia Brasileira de Metalurgia e Mineração, Brazil Niobelcon BV, Belgium
Correlation of WC Grain Size Distribution to Hardness and Coercivity Persson T Seco Tools AB, Sweden
The Corrosion Behaviour of WC-TiC-Co Cemented Carbides in Alkaline Solutions Lin N, He Y, Liu X, Wu C Central South University, China China National R&D Center for Tungsten Technology, China
Microstructure Analysis and Mechanical Properties of NbC-Co/Ni/Cu/FeAl Cemented Carbides Huang S, Vleugels J, Vanmeensel K Katholieke Universiteit Leuven, Belgium
On the Formation Mechanism of TaC/TaNbC Aggregation in WC-Co Cemented Carbides Qu J, Xie W, Chen X, Wen G, Wang S, Xiong W, Huang W Zhuzhou Cemented Carbide Cutting Tools Co., Ltd., China Huazhong University of Science and Technology, China
Fatigue Behavior of Cemented Carbide Based Forming Tools Andreas K, Merklein M, Engel U University of Erlangen-Nuremberg, Germany
Fatigue Behavior of a WC-Ni Cemented Carbide Tarragó J.M, Ferrari C, Reig B, Coureaux D, Schneider L, Llanes L Universitat Politècnica de Catalunya, Spain Sandvik Hard Materials - Sandvik Española S.A., Spain Sandvik Hard Materials, United Kingdom
Structural Determination of (Cr,Co)7C3 Kaplan B, Blomqvist A, Århammar C, Selleby M, Norgren S Sandvik Coromant R&D Materials and Processes, Sweden KTH Royal Institute of Technology, Sweden Sandvik Mining R&D Rock Tools, Sweden In Situ Reduction of Vanadium Oxide to Nano Vanadium Carbide Mahajan M, Singh K, Pandey O.P Thapar University, India
Mechanical strength of WC-Co: Influence of temperature, microstructure and testing configuration Torres Y, Bermejo R, Gotor F.J, Llanes L.M Universidad de Sevilla, Spain Montanuniversität Leoben, Austria Instituto de Ciencia de Materiales de Sevilla, Spain 4Universidad Politécnica de Cataluña, Spain
Micro Facets at WC/Co Interfaces in VC-Doped WC-Co Alloys with a Variation of Carbon Content Yamamoto T, Sugiyama I, Mizumukai Y, Taniuchi T, Shirase F, Okada K, Ikuhara Y 1Nagoya University, Japan Tokyo University, Japan Mitsubishi Materials Corp., Japan
Effect of Binder Content on Fracture Toughness KIC of Cermet and Cemented Carbide Ogura T, Syoji T, Matsuno K, Kitamura K, Terada O, Hayashi K Fuji Die Co., Ltd., Japan
Creep Behaviour of Hardmetals with Alternative Binder Alloys at Elevated Temperatures Buchegger C, Lengauer W Vienna University of Technology, Austria
Multiscale Modeling of Mechanical Performance of P/M Microstructures Laukkanen A, Virta J, Varis T, Fortino S, Andersson T, Laitinen T VTT Technical Research Centre of Finland, Finland
Material Characterization Using Positrons: New Opportunities for Industry Rey J.-M, Visiere S, Liszkay L, Perez P CEA SACLAY and Posithot, France Posithot, France CEA SACLAY, France
Correlation of Impact/Wear Behavior to Physical Properties of WC-Co Mining Grades Jewett T, Useldinger R Global Tunsgten & Powders Corp., USA CERATIZIT Luxembourg S.à.r.l., Luxembourg
Analysis of the Tribological Behaviour of WC-Ni-Co-Cr Hardmetals in Contact with Steel at High Temperatures Sánchez-Moreno J.M, Aristizabal M, Arizmendi M, Fernandez J, Ibarreta F, Martinez R CEIT-Centro de Estudios e Investigaciones, Spain TECNUN, Spain FMD-CARBIDE, Spain
Parallel Beam Glancing X-Ray Diffraction: a New Technique for Measuring Surface Residual Stresses Sánchez-Moreno J.M, Aranburu A, Iparraguirre I CEIT-Centro de Estudios e Investigaciones, Spain
In-Situ Mechanical Characterisation of WC-Co Hardmetals Using Micro-Beam Testing Trueba M, Elizalde R, Ocaña I, Martinez-Esnaola J.M, Sánchez-Moreno J.M CEIT and TECNUN, Spain Micro-Defects in Ground Tungsten Carbide Revealed by (Sub-) Surface Investigations Fisslthaler E, Knitel S, Feistritzer S, Werner G Graz Centre for Electron Microscopy, Austria Institute for Electron Microscopy, Graz University of Technology, Austria Tribo Hartstoff GmbH, Germany
Advanced Cross-Sectional Characterization of Hard Coatings Tkadletz M, Mitterer C, Keckes J, Rebelo de Figueiredo M, Hosemann P, Burghammer M, Sartory B, Czettl C Materials Center Leoben Forschung GmbH, Austria Department of Physical Metallurgy and Materials Testing, Montanuniversität Leoben, Austria Department of Materials Physics, Montanuniversität Leoben, Austria Department of Nuclear Engineering, University of California at Berkeley, USA 5ESRF, France 6CERATIZIT Austria GmbH, Austria
CSUTDCC and CSUDDCC – The Development and Applications of New Thermodynamic and Diffusivity Databases for Cemented Carbides Peng Y, Zhou P, Chen W, Zhang W, Du Y, Wang S, Wen G, Xu T, Zhang Z Central South University, China Zhuzhou Cemented Carbide Cutting Tools Co., Ltd., China State Key Laboratory of Cemented Carbide, China
16:10 - 18:10Hard Materials - Chemical Vapor Deposition
16:10CVD Ti1-xAlxN Coatings for Large Scale Production Holzschuh H, Bürgin W SuCoTec AG, Switzerland
16:30Novel TiAlN Coating by Moderate Temperature Low Pressure CVD Pitonak R, Koepf A, Weissenbacher R, Keckes J, Bartosik M, Endler I, Höhn M, Matthey B Boehlerit GmbH & Co. KG, Austria Montanuniversität Leoben, Austria Fraunhofer IKTS-Dresden, Germany
16:50Structure and Properties of AlO3 Coatings Prepared by LPCVD with AlCl3 and NO Höhn M, Endler I Fraunhofer Institut IKTS Dresden, Germany
17:10Thermal Stability and Cutting Performance of Titanium or Zirconium Doped κ-AlO3 Coatings by Chemical Vapor Deposition Okude M, Tomita K, Yamaguchi K, Osada A Mitsubishi Materals Corporation, Japan
17:30Thermal Stress Relaxation of Dry-Blasted α- and κ-AlO3 CVD Hard Coatings Schalk N, Mitterer C, Czettl C, Penoy M, Michotte C Materials Center Leoben Forschung GmbH, Austria Montanuniversität Leoben, Austria CERATIZIT Austria GmbH, Austria 4CERATIZIT Luxembourg S.à.r.l., Luxembourg
17:50In-Situ Stress Analyses of Coated Cutting Tools under Thermal Cycling Conditions García J, Coelho R, Ramos Moore E, Pinto H Sandvik Coromant R&D, Sweden Hemholtz Zentrum Berlin fuer Materialien und Energie GmbH, Germany Universitaet des Saarlandes, Germany Universidade de São Paulo, Brazil
16:10 - 18:10Poster Session Refractory Metals - P/M Processes
High Strength Gradient Structural Tantalum with High Nitrogen Content Zhang Y, Zhang X, Bai X, Cai X, Wang F, Wang H, Li Z, Yu Z Northwest Institute for Non-ferrous Metal Research, China
Fabrication of a Nanocrystalline Surface Layer on Bulk Tantalum by Means of a Sliding Friction Treatment Zhang Y, Yu Z, Dong F, Yuan S, Yu S, Niu J, Ma X, Zhang Y, Liu C, Wen B 1Northwest Institute for Non-ferrous Metal Research, China
Bodies of Cermet-Like Materials by Laser Micro Sintering Horn M, Regenfuss P, Streek A, Exner H Hochschule Mittweida, Germany
Technical and Economical Comparison of Different Powder Pressing Concepts Under the Aspect of Energy Efficiency Schmidt H.-C DORST TECHNOLOGIES, Germany
Pre-Sintering Behaviour of Mo-Powders Edtmaier C, Schubert W.-D, Gierl C, Pilz L, Plankensteiner A, Huber K TU Wien, Austria PLANSEE SE, Austria
Effects of Ti on the Joint Strength of W-20vol%Cu Composite Using Ag-Cu-Ti Filler Foils Itohara T, Nosaki K, Hiraoka Y, Hanado H Okayama University of Science, Japan Kawaso Texcel Co.Ltd, Japan
Densification of a W-25wt%Ag Powder Prepared by High Eenergy Milling Costa F.A, Silva A.G, Rezende L, Gomes U.U, Filgueira M UFRN, Brazil UENF, Brazil
Densification Behavior of Pure Tantalum Powder by Conventional and Spark Plasma Sintering Kim Y, Lee J, Hwang J.W, Hong S.H Agency of Defence Development, South Korea Korea Advanced Institute of Science and Engineering, South Korea KAIST, South Korea
Defect-Free Infiltration and Back Casting of Refractory Metal Components with Copper Valentini B, Plankensteiner A, Kowanda C, Müller T, Müller F.E.H PLANSEE SE, Austria PLANSEE Powertech AG, Switzerland
Influence of Heating Rate and Manufacturing Speed on P/M Silver Diamond Composites Kitzmantel M, Castillo P, Neubauer E, Hell J, Kapaun W RHP-Technology/TU Wien, Austria RHP-Technology, Austria TU Wien, Austria
Microstructure and Ductility of Mechanical Milled and Fast Sintered Mo-W Alloys Kestler H, Tabernig B, Schreiber G, Martin U PLANSEE SE, Austria Technische Universität Bergakademie Freiberg, Germany
Solid Solution Hardening of Molybdenum-Titanium-Alloys Löffler C, Ohser-Wiedemann R, Martin U, Freudenberger J, Heger D, Martin S, Schreiber G PLANSEE SE, Austria TU Bergakademie Freiberg, Germany Rapid Sinter Pressing - From Powder to Fully Dense Parts in Seconds Neubauer E, Garcia L, Kitzmantel M RHP-Technology GmbH & Co KG., Austria
Analysis of Powder Deposition in Laser Additive Manufacturing Seyda V, Nagel M, Garlof S, Emmelmann C Institute of Laser and System Technologies (iLAS), Hamburg University of Technology (TUHH), Germany
Thursday, 6 June, 2013
08:00 - 10:10Hard Materials - Physical Vapor Deposition 1
08:00Combinatorial Materials Science: From Materials Discovery and Optimization to Materials Design Approaches for Thin Films and Bulk Materials Schneider J.M RWTH Aachen University, Germany
08:30Impact of Al on Structure and Mechanical Properties of NbN and TaN Zehua Z, Rachbauer R, Holec D, Mayrhofer P Montanuniversität Leoben, Austria Vienna University of Technology, Austria
08:50About the Synthesis of Next Generation High Oxidation Resistant Hard Coatings by Means of Novel High Ionization Hybrid PVD Processing Erkens G, Vetter J, Müller J, Krienke T Sulzer Metaplas GmbH, Germany
09:10Phase Formation at the Surface of Al-Hf Targets in Reactive Cathodic Arc Evaporation and the Correlation with the Synthesized Coatings Döbeli M, Dommann A, Maeder X, Neels A, Polcik P, Rachbauer R, Ramm J, Rudigier H, Widrig B Ion Beam Physics, ETH Zurich, Switzerland Centre Suisse d’Electronique et de Microtechnique CSEM SA, Switzerland PLANSEE Composite Materials GmbH, Germany OC Oerlikon Balzers AG, Liechtenstein
09:30Influence of Si on the Arc Evaporation Behaviour of Al-Cr Targets and Structural Evolution of (Al0.7Cr0)O3 Oxide Coatings Paulitsch J, Rachbauer R, Ramm J, Polcik P, Mayrhofer P.H Christian Doppler Laboratory for Application Oriented Coating Development at the Institute of Materials Science and Technology, Vienna University of Technology, Austria OC Oerlikon Balzers AG, Liechtenstein PLANSEE Composite Materials GmbH, Germany Institute of Materials Science and Technology, Vienna University of Technology, Austria
09:50Residual Stress and Damage Evolution in Coated Cemented Carbide Milling Inserts Teppernegg T, Kluensner T, Tritremmel C, Czettl C, Keckes J, Wroblewski T, Ebner R, Pippan R Materials Center Leoben Forschung GmbH, Austria CERATIZIT Austria GmbH, Austria Montanuniversität Leoben, Austria HASYLAB, DESY, Germany 5Erich Schmid Institute of Materials Science, Austria
08:30 - 10:10Special Interest Session: Refractory Metals - Powder Production and Recycling
08:30Thermal Plasma Decomposition as the Production Method of Metal Powders Mieczyslaw W Institute of Non-Ferrous Metals, Poland
08:50Processing of Tungsten Values of Flot Grade Tungsten Ore Concentrates via High Temperature Roasting in Sodium Carbonate Singh Gaur R.P, Braymiller S.A, Wolfe T.A Global Tungsten & Powders Corp., USA
09:10An Aqueous Multicomponent Model for the Crystallization of Ammonium Paratungstate Christian J.B Global Tungsten & Powders Corp., USA
09:30Ammonium Metatungstate Produced via Roasting of Ammonium Paratungstate Lunk H.-J, Fait M.J.G, Feist M, Frisk T.A Global Tungsten & Powders Corp., USA Leibniz-Institut für Katalyse, Germany Humboldt-Universität zu Berlin, Institut für Chemie, Germany
09:50Formation and Growth of Columnar-Shape W-Cu Oxide Particle Tao L, Jinglian F, Yaofeng G Central South University, China
10:30 - 12:30Hard Materials - Physical Vapor Deposition 2
10:30Means to Improve Thermal Stability of TiAlN Hard Coatings Oden M Linköping University, Sweden
10:50Microstructure of Cathodic Arc Evaporated (Ti,Al)N Hard Coatings in the Vicinity of Cutting Edge Rafaja D, Wüstefeld C, Heger D, Šíma M, Jílek M TU Bergakademie Freiberg, Germany SHM Sumperk, Czech Republic
11:10Advances in Deposition Equipment and Process Technology for HiPIMS Coatings for Cutting Tools Schiffers C, Hultman L, Greczynski G, Leyendecker T CemeCon AG, Germany Linköping University, Sweden
11:30Application of (Ti,Cr,Al,Si)N PVD Coatings in Hard Machining of PM High Speed Steel Bagcivan N, Bobzin K, Brugnara R.H, Stalpers L RWTH Aachen University, Germany
11:50Effect of Grain Size of Targets on Arc Behavior and Coating Characteristics for AlTiN and AlCrN Coatings Deposited by CARC+ Technology from Powder Metallurgical Targets Papa F, Viskocil J, Polcik P Hauzer Techno Coating BV, The Netherlands HVM PLasma Ltd., Czech Republic PLANSEE Composite Materials GmbH, Germany
12:10Development of New Cathodic Arc Source and its Application Yamamoto K, Abe M, Tanifuji S Kobe Steel Ltd., Japan
10:30 - 12:30Poster Session Refractory Metals - Powder Production & Recycling
Influence of the Milling Velocity on the Synthesis of a Nb-10%Cu Composite Powder Costa F.A, Barbosa C.V, Gomes U.U, Filgueira M, Silva A.G UFRN, Brazil UENF, Brazil
Structure and Properties of Secondary Tungsten Powder Xi X, Nie Z, Ma L Beijing University of Technology, China
10:30 - 12:30Poster Session Refractory Metals - P/M Technology, Modeling and Simulation, Analysis and Testing
Effects of Trace TiC on Microstructure and Properties of Molybdenum Alloy Fan J, Qian Z, Cheng H, Tian J State Key Laboratory of Powder Metallurgy, China
MoSi2 Coating Formation on Molybdenum and its High Temperature Oxidation Resistance Wei L, Jinglian F, Lairong X, Zhenyang C, Haijun M, Pengfei L Central South University, China
Study on Quantitative Characterization of Molybdenum Powder Morphology Han Q, Cao W Jinduicheng Molybdenum Co., Ltd., China
The Microstructure of Mo-Nb Alloy Single Crystals Zhongwu H, Zhongkui L, Tao Y, Linjiang G, Jianping Z Northwest Institute for Non-ferrous Metal Research, China Chinese Institute of Atomic Energy, China Diffusion of Oxygen in Cell Structure Strengthening Ta-W-Hf Alloy Xiaomei C, Xiaoming Z, Yusheng Z, Feng W, Hui W Northwest Institute for Non-ferrous Metal Research, China
Particle Generation in Thin Films Zhang Q, Sun S, Tang P H.C. Starck, USA
Phase stabilities and diffusion kinetics in Mo/Si-B diffusion couples Kriegel M, Foerster W, Chmelik D, Fabrichnaya O, Januschewsky J, Kathrein M, Sigl L.S, Rafaja D TU Bergakademie Freiberg, Germany PLANSEE SE, Austria
Grain boundary segregations in technically pure molybdenum Babinsky K, Primig S, Knabl W, Lorich A, Weingärtner T, Leitner H Montanuniversität Leoben, Austria PLANSEE SE, Austria Karlsruher Institut für Technologie, Germany
Corrosion Properties of Tantalum Sheet Exposed to Air at Elevated Temperatures Aimone P, Orlik A HC Starck, USA
Dynamic Abnormal Grain Growth in Commerical-Purity Molybdenum Ciulik J M&M Engineering Associates, Inc., USA Electric Plastic Effects of Tungsten Electrodes Jiancan Y, Yuchen X, Wenguang Z, Zuoren N Beijing University of Technology, China
Arc Erosion of Various Pure Element Thin Films Vüllers F.T.N, Kowanda C, Müller F.E.H, Diener M, Spolenak R Laboratory for Nanometallurgy, ETH Zurich, Switzerland PLANSEE Powertech AG, Switzerland
Sputter Rate vs. Texture Tang P H.C. Starck, USA
P/M Manufacturing of Niobium Silicide Based Materials Drawin S ONERA, France
Thermal Diffusivity Measurement of Tungsten and Tungsten Alloys at Very High Temperatures Pintsuk G, Gormann F Forschungszentrum Jülich, Germany
Extension of the Master Sintering / Decomposition Curve Concept to Model the Reduction of Molybdenum Oxide Enneti R.K Global Tungsten & Powders Corp., USA
Phase Equilibria in the Ni-Ti-W and Ni-Ti-Cr Systems Gasik M, Isomäki I, Hämäläinen M, Friman M Aalto University School of Chemical Technology, Finland
13:40 - 15:50Refractory Metals - P/M Processes 1
13:40Self-Similar Microstructure and Property Trajectories for Sintering German R San Diego State University, USA
14:10Mass Production and Joining Via Multicomponent Tungsten Powder Injection Molding Antusch S, Piotter V, Rieth M KIT-IAM, Germany
14:30Microstructure and Compression Strength of Fast Sintered Mo -TiC Composites Martin U, Ohser-Wiedemann R, Weck C, Martin S, Korpala G, Oertel C.-G Technische Universität Bergakademie Freiberg, Germany Technische Universität Dresden, Germany
14:50Preparation and Properties of W-TiC with Ultra-Fine Grain by SPS Sintering Method Xiang C, Huang Y, Zhang H, Li Z, Tang H Northwest Institute for Non-ferrous Metal Research, China
15:10Laser Additive Manufacturing - A New Manufacturing Technology for Parts of Composites with Refractory Metals? Weisheit A, Dobrzanski D, Ocylok S, Wissenbach K, Kelbassa I Fraunhofer-Institut für Lasertechnik ILT, Germany Lehrstuhl für Lasertechnik, RWTH Aachen, Germany
15:30Energy Dissipation and Sinter Mechanisms in a Laser Supported Generative Fabrication Process Using µm-Scaled Powders Regenfuss P, Streek A, Horn M, Exner H Hochschule Mittweida, Germany
13:40 - 15:50Poster Session Hard Materials - Surface Engineering
Research of CVD-AlO3 Coating Doped Zr for High Efficiency Cutting Process Li X, Chen X, Yu Z, Liu W Zhuzhou Cemented Carbide Cutting Tools Co., Ltd., China School of Materials Science and Engineering, Central South University, China
The Influence of CO and N2 Atmosphere on Formation of Surface Gradient Layers in Cemented Carbides Experimental Study and Computer Simulation Xie W, Wen G, Zhang W, Peng Y, Chen W, Du Y, Wang S Zhuzhou Cemented Carbide Cutting Tools Co., Ltd., China State Key Laboratory of Powder Metallurgy, Central South University, China
Surface Coating of Ti(CN) Base Cermets Zhou S, Wang S, Chen L, Zhu L Zhuzhou Cemented Carbide Cutting Tools Co., Ltd., China
Phase Stability, Mechanical Properties and Thermal Stability of Y Alloyed Ti-Al-N Thin Films Riedl H, Hollerweger R, Holec D, Paulitsch J, Rachbauer R, Polcik P, Mayrhofer P.H Christian Doppler Laboratory for Application Oriented Coating Development at the Institute of Materials Science and Technology, Vienna University of Technology, Austria Institute of Materials Science and Technology, Vienna University of Technology, Austria OC Oerlikon Balzers AG, Liechtenstein 4LANSEE Composite Materials GmbH, Germany
Thermal Stability and Oxidation Resistance of TiAlN/TaAlN Multilayer Coatings Koller C.M, Hollerweger R, Paulitsch J, Rachbauer R, Polcik P, Mayrhofer P.H Christian Doppler Laboratory for Application Oriented Coating Development at the Institute of Materials Science and Technology, Vienna University of Technology, Austria Institute of Materials Science and Technology, Vienna University of Technology, Austria OC Oerlikon Balzers AG, Liechtenstein 4PLANSEE Composite Materials GmbH, Germany
Phase Stability, Thermal Stability and Oxidation Resistance of Arc-Evaporated Ti-Al-Ta-N Coatings Hollerweger R, Arndt M, Rachbauer R, Polcik P, Paulitsch J, Mayrhofer P.H Christian Doppler Laboratory for Application Oriented Coating Development at the Institute of Materials Science and Technology, Vienna University of Technology, Austria OC Oerlikon Balzers AG, Liechtenstein PLANSEE Composite Materials GmbH, Germany 4Institute of Materials Science and Technology, Vienna University of Technology, Austria
Microstructure Formation in TiAlN / AlTiRuN Multilayers Grown by Cathodic Arc Evaporation Wüstefeld C, Rafaja D, Motylenko M, Heger D, Michotte C, Czettl C, Kathrein M Technical University TU Bergakademie Freiberg, Germany CERATIZIT Luxembourg S.à.r.l., Luxembourg CERATIZIT Austria GmbH, Austria
Comparison of the Structure and Properties of TiAlN, CrAlN and TiAlN/CrAlN Multilayer Coatings Deposited by Cathode Arc Evaporation Li J, Chen L, Wu M, Pei F, Wang S Zhuzhou Cemented Carbide Cutting Tools Co., Ltd., China
The Influence of TiAlCO Layer on the Microstructure and Properties of CVD AlO3 Coating Liu W, Chen X, Li X, Zhou W, Wei Q Zhuzhou Cemented Carbide Cutting Tools Co., Ltd., China Central South University, China
Novel Hard Coatings for High Performance Hot Working Tools Rosso M, Peter I, Motoiu P Politecnico di Torino, Italy Tehnoid com srl, Romania
Arc Evaporation of Metallic, Intermetallic and Ceramic Target Materials to Prepare Al-Cr-N Coatings Sabitzer C, Paulitsch J, Polcik P, Arndt M, Rachbauer R, Mayrhofer P.H Christian Doppler Laboratory for Application Oriented Coating Development at the Institute of Materials Science and Technology, Vienna University of Technology, Austria Institute of Materials Science and Technology, Vienna University of Technology, Austria PLANSEE Composite Materials GmbH, Germany 4OC Oerlikon Balzers AG, Liechtenstein
New Triondur® Coatings: from Target Materials to Nanostructure Surface for CO2 Reduction Hosenfeldt T, Musayev Y Schaeffler Technologies AG & Co. KG, Germany
Influence of V on Structure, Mechanical and Thermal Properties of Ti–Al–N Li C, Yong D, Ying B P, She Q W, Jia L Central South University, China Zhuzhou Cemented Carbide Cutting Tools Co., Ltd., China
Increase of the Performance of CBN Tools by Residual Stress and Adhesion Optimized Hard Coating Systems Frank H, Michel H, Mahr P GFE - society of production engineering Schmalkalden, Germany
Industrial-Scale Sputter Deposition of Cr1-xAlxN Coatings with Various Compositions from Segmented Powder-Metallurgical Targets Weirather T, Czettl C, Polcik P, Kathrein M, Mitterer C Montanuniversität Leoben, Austria CERATIZIT Austria GmbH, Austria PLANSEE Composite Materials GmbH, Germany
Frictionfree, Hard and Super-Hard Carbon-Based Coating for Industrial Application Precht W.H Technical University of Koszalin, Poland
Development of PVD Coatings Reducing Wear Caused by Comb Cracks in Interrupted Cutting Maixner V, Sima M, Jilek M, Flasar P, Subrt J Pramet Tools, s.r.o., Czech Republic SHM, s.r.o., Czech Republic
Microstructural Characterisation and Abrasive Wear Performance of Refractory Cermet Particle Reinforced PTA Hardfacing Zikin A, Yung D.-L, Hussainova I, Priso J, Gavrilovic A, Danninger H ACT Research GmbH, Austria Department of Materials Engineering, Tallinn University of Technology, Estonia CEST Centre of Electrochemical Surface Technology, Austria Institute of Chemical Technologies and Analytics, Vienna University of Technology, Austria
ZrN as a Diffusion Barrier Soating – Beyond Conventional Wear Applications Papageorgiou V, Strakov H, Lieberman V, Bonetti R Ionbond AG, Switzerland
Precision ELID-Grinding of Cermets on a Surface Grinder Kersschot B, Qian J, Reynaerts D KU Leuven, Belgium
The Influence of Chromium and Ion Energy on Growth of α-Alumina Films Deposited by ICP/CCP Plasma CVD at 780°C Neubert M, Poukhovoi A, Pflitsch C, Atakan B, Buck V University of Duisburg-Essen, Germany
Ultrafine Cermet Coating – Fabrication and Combination Properties Wang H, Song X, Liu X, Wei C, Guo G, Nie Z Beijing University of Technology, China
Thermal Spray and Laser Applied TCHP Barrier Coatings for Extended Life Keane J.M, Hancox A, Evans D Allomet Corporation, USA
13:40 - 15:50Poster Session Hard Materials - Powder, P/M Processes & Recycling
‘Violet Tungsten Oxide’s In-Situ Reduction’ Technology for the Preparation of Ultrafine Grained WC-Co Hardmetals Wu C, Nie H, Xiao M, Xie H China National R&D Center for Tungsten Technology, China
Study on Brush Wear and Polishing Efficiency by Mechanical Polishing with Brush Zeng W, Mou W, Wang P, Li Q Zigong cemented carbide co.,LTD, China
The Synthesis of Borides of Refractory and Rare Earth Metals by Reduction-Distillation Mukherjee A, Kumar S, Krishnamurthy N Bhabha Atomic Research Centre, India
Magnetic Characteristics of Nanocarbon of Different Modifications Bogatyreva G, Shevchenko A ISM - V.Bakul Institute of Superhard Materials, National Academy of Sciences of Ukraine, Ukraine IMP - G.Kurdyumov Institute of Metallophysics, National Academy of Sciences of Ukraine, Ukraine
New Analytical Computer-Based Methods of Diagnostics of Characteristics of Powders of Superhard Materials Bogatyreva G, Petasyuk G ISM - V.Bakul Institute of Superhard Materials, National Academy of Sciences of Ukraine, Ukraine
Influence of Process Parameters on Microstructure and Density of an Ultrafine WC-6 Co Hard Metal Produced by Spark Plasma Sintering (SPS) Zivcec M, Broeckmann C IWM RWTH Aachen, Germany
Use of Mechanically Induced Self-Sustaining Reactions in the Design of Cermets Based on Complex Transition Metal Carbonitrides Chicardi E, Córdoba J.M, Sayagués M.J, Torres Y, Gotor F.J Instituto de Ciencia de Materiales de Sevilla (US-CSIC), Spain Universidad de Sevilla, Spain
Thermal Compression Treatment of WC-Co and TiC-VC-NbC-WC-Ni-Cr Hard Alloys Kramar H, Bodrova L, Marynenko S, Prokopiv M Ternopil Ivan Pul'uj National Technical University, Ukraine Ternopil Ivan Pul'uj Nation, Ukraine V. Bakul Institute for Superhard Materials, Ukraine
Influence of Milling Conditions in Processing of Submicron to Near-Nano WC/Co Powders Caspers B, Zumdick M H.C. Starck GmbH, Germany
Hard Alloys Production During Vacuum Sintering of Nanometric Tungsten Carbide-Cobalt Composition Blagoveshchenskiy Y, Isaeva N, Melnik Y, Blagoveshchenskaya N IMET RAS, Russia
Compaction Process of Pure Tungsten Carbide by Spark Plasma Sintering Chuvildeev V, Boldin M, Sakharov N, Nokhrin A, Blagoveshchenskiy Y, Isaeva N, Melnik Y, Blagoveshchenskaya N 1NIFTI UNN, Russia IMET RAS, Russia
Short-term Recycling Technique for Tungsten Carbides Scraps Liu X, Song X, Wang Y, Wei C, Nie Z, Guo G Beijing University of Technology, China
Hydrogen Reduction of Tungsten Oxides: Alkali Additions and Their Interaction on the Metal Nucleation Process Zimmerl T, Schubert W.D, Bock A Wolfram Bergbau und Hütten AG, Austria Vienna University of Technology, Austria
Incorporation of Titanium, Tantalum, and Vanadium into the Hexagonal WC Lattice Pasquazzi A, Kremser G, Halwax E, Schubert W.D Vienna University of Technology, Austria Wolfram Bergbau und Hütten AG, Austria
Experimental and Theoretical Study of the Grain Growth Process of WC-Co Nano Composites Kumar A, Singh K, Pandey O.P Sri Guru Granth Sahib World University, India Thapar University, India
16:10 - 17:30Refractory Metals - P/M Processes 2
16:10Laminated Hybrid of Tungsten Base Alloys Chaiat D Tungsten Powder Technology, Israel
16:30Aluminum Deposition onto Molybdenum and Tungsten Applying Cold Spray Technology: Study of Morphology, Cold Cpray Parameters, Diffusion Kinetics and Alloy Formation Wiltner A, Klöden B, Dittrich F, Weißgärber T, Kieback B, Schreiber J.M, Eden T.J, Smid I Fraunhofer Institute IFAM, branch lab Dresden, Germany Penn State, Engineering Science & Mechanics and Applied Research Laboratory, USA
16:50A Study of Welding Behavior for Molybdenum with and without Lanthanum Oxide Additions Leonhardt T, Gould J Rhenium Alloys Inc., USA EWI, USA
17:10Microstructure and Properties of Welded Joints of a Multicomponent Nb–Ti–Al Alloy Bai R, Zheng X, Cai X, Wang F, Wang D, Xue S, Xia M, Li Z 1Northwest Institute for Non-ferrous Metal Research, China
Friday, 7 June, 2013
08:30 - 10:30Hard Materials - Mechanical Properties
08:303-D Characterization by SEM/FIB Tomography of Toughening and Fatigue Micromechanisms in Hardmetals Jiménez-Piqué E, Turón M, Tarragó J.M, Llanes L Universitat Politècnica de Catalunya, Spain
08:50High Resolution Observation of Crack Propagation in Hardmetals During Monotonic and Fatigue Fracture Mingard K, Jones H, Roebuck B, Gee M, Nunn J 1NPL, United Kingdom
09:10Fatigue Testing of Hardmetals in the Gigacycle Range Betzwar-Kotas A, Weiss B, Danninger H, Sánchez-Moreno J.M, Mingard K University of Vienna, Austria Vienna University of Technology, Austria CEIT, Spain 4NPL, United Kingdom
09:30Damage Induced Under Contact Fatigue on Ceramic-Coated Hardmetals Llanes L, Tarrés E, Ramírez G, Yang J, Jiménez-Piqué E, Salán N, Mateo A Universitat Politècnica de Catalunya, Spain Sandvik Hard Materials, United Kingdom
09:50Evolution of the Microstructure During Creep Testing of WC-Co Based Cemented Carbides Yousfi M.A, Falk L.K.L, Andrén H.-O Chalmers University of Technology, Sweden
10:10Abrasion Simulation for WC/Co Hardmetals Gee M, Gant A, Nunn J, Jones H, Mingard K National Physical Laboratory, United Kingdom
10:50 - 12:50Refractory Metals - Characterization
10:50Mechanical Characterization of Refractory Metal/Ceramic Interfaces by Nanoindentation Drory M.D, Ujari P.U Philips Healthcare, USA
11:10Anisotropic Fracture Behavior of Tungsten Based Materials Wurster S, Gludovatz B, Pippan R Erich Schmid Institute of Materials Science, Austria Lawrence Berkeley National Laboratory, USA
11:30A Study of Mechanical Properties and Microstructure of Tungsten Heavy Alloys Using Modified Taylor Method Kaczorowski M Warsaw University of Technology, Poland
11:50Chemistry of the Hafnium-Rich Carbide Phase in the Molybdenum Based Alloy MHC Pöhl C, Lang D, Schatte J, Leitner H Montanuniversität Leoben, Austria PLANSEE SE, Austria
12:10Pore-Boundary Interaction in Sintered Niobium Zilnyk K, Leite G.S, Sandim H EEL - USP, Brazil
12:30Microstructural Features of Switched Cu-Cr Surface Melt Layers von Klinski-Wetzel K, Kowanda C, Rettenmaier T, Heilmaier M, Hinrichsen V, Müller F.E.H Karlsruhe Institute of Technology, Germany PLANSEE Powertech AG, Switzerland Darmstadt University of Technology, Germany
12:50 - 13:00Farewell Address
12:50Farewell Address Sigl L.S Seminar Chairman of the 18th Plansee Seminar, PLANSEE SE, Austria